Mitsubishi Electric QJ81DL96 User Manual page 171

5
HIGH SPEED DATA LOGGER MODULE TOOL STARTUP
POINT
Program Compatibility Assistant screen
When using Windows Vista
may be displayed after the installation completion. Follow the procedure to finish
the installation. (The following screen images are from Windows Vista
If "Reinstall using recommended settings" is selected by mistake, the 'Windows
XP SP2 compatibility mode' is automatically set. Disable the 'Windows XP SP2
compatibility mode' by following the procedure described below, and install the
product again.
Uncheck the check box.
®
or later, the Program Compatibility Assistant screen
1. Select "This program installed correctly".
2. Restart the Windows
1. Right-click on the setup.exe icon of the installation
target in the Windows explorer, and open the setup
Properties screen.
2. Select the <<Compatibility>> tab and click the
3. Uncheck the "Run this program in compatibility
mode for:" check box of compatibility mode in the
<<Compatibility for all users>> tab, and click the
button.
4. Click the button on the setup Properties
screen.
5. Install the product again. ( Section 4.2.1)
5.2 Installation
5.2.1 Installation procedure
®
.)
®
operating system.
button.
5
1
2
3
4
5
6
7
8
- 6