Mitsubishi Electric QJ81DL96 User Manual page 591

Melsec q series, high speed data logger module
Table of Contents

Advertisement

18
TROUBLESHOOTING
Error code
0B13
E-mail transmission error
H
0B14
System error
H
0B15
No attached file error
H
0B16
SMTP server login error
H
0B17
E-mail header send error
H
E-mail main text send
0B18
H
error
0B19
Attached file send error
H
0B1A
SMTP server logout error
H
E-mail sending not
0B1B
H
possible
0B1C
POP server login error
H
E-mail transfer error (a
0B1D
H
part of E-mail addresses)
0B20
H
to
System error
0B22
H
0B23
Resend buffer write error
H
0B24
Resend buffer write error
H
0B25
Resend buffer write error
H
Error name
An error occurred during the e-mail
transmission.
The saved file to be attached to the e-mail
was deleted before transmission because
of file switching.
Failed to connect to the mail server
(SMTP server).
Failed to send the e-mail header.
Failed to send the e-mail body.
Failed to send the attachment.
Failed to disconnect from the mail server
(SMTP server).
Made an e-mail transmission request
during "Network setting" default operation.
Failed to connect to the mail server (POP
server).
Failed to send e-mail to a portion of
destinations.
Failed to write files to FTP resend buffer.
Failed to write files to FTP resend buffer.
Failed to write files to FTP resend buffer.
Description
• Correct the "E-mail setting".
• Check the connection status with the
mail server.
• Check the destination mail server
status.
• Configure the authentication settings in
"E-mail setting".
• Please consult your local Mitsubishi
-
representative, explaining a detailed
description of the problem.
• Correct the saved settings (file switch
timing, number of saved files)
 Section 11.5.15 (5) POINT
• Correct the "E-mail setting".
• Check the connection status with the
mail server.
• Check the destination mail server
status.
• When turning the power ON
immediately after it is turned OFF, wait a
few minutes before turning it ON.
• Check the connection status with the
mail server.
• Check the destination mail server
status.
• Clear "Network setting" default
operation.
• Correct the "E-mail setting".
• Check the connection status with the
mail server.
• When turning the power ON
immediately after it is turned OFF, wait a
few minutes before turning it ON.
• Correct the destination e-mail address
settings in "E-mail setting".
• Please consult your local Mitsubishi
-
representative, explaining a detailed
description of the problem.
• Delete unnecessary files on the
CompactFlash card to ensure free
space.
• Replace the CompactFlash card.
• Write the settings again with the
Configuration Tool.
• Replace the CompactFlash card.
• Write the settings again with the
Configuration Tool.
• Delete unnecessary files on the
CompactFlash card to ensure free
space.
• Replace the CompactFlash card.
18.2 Error Code List
(From the previous page)
Action
(Continued on the next page)
18
- 24
17
18
A
I

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sw1dnn-dlutl-e

Table of Contents