Mitsubishi Electric QJ81DL96 User Manual page 385

11
FUNCTIONS OF CONFIGURATION TOOL (MODULE SETTINGS)
(5) Transfer setting screen
Item
Transfer files to the following FTP
server
Transfer destination 1. to 3.
button
E-mail files to the following
destination
E-mail address 1. to 3.
button
button
Transfers the latest saved file when the file is switched.
Check to transfer the file to the FTP servers.
Select from the FTP servers registered on the "FTP setting" screen.
Opens the "FTP setting" screen to edit the details of each destination FTP server.
Check to attach the file to an e-mail and send it.
Select from the destination group names registered with "E-mail setting" screen.
Opens the "E-mail setting" screen to edit the e-mail destinations.
Opens the "E-mail content setting" screen to edit the e-mail contents.
POINT
(1) E-mail transmissions/file transfers by the saved file transfer function may take
a few seconds to tens of seconds depending on the network line/transmission
size.
Target files may be deleted before e-mail transmission/file transfer completes
depending on the settings.
Review the file switching timing ( (2) in this section) and the number of
saved files ( (4) in this section) setting and lengthen the time until the file
is deleted.
(2) Do not configure the transfer settings when performing data logging using the
auto logging function ( Section 10.2).
When using the auto logging function, the high speed data logger module
cannot connect to the LAN line, therefore FTP transfers and e-mail
transmissions cannot be performed.
Description
11.5 Data Logging Setting
11.5.15 Save
9
10
11
12
Reference
-
-
(5) (a) in this
13
section
-
-
(5) (b) in this
section
(5) (c) in this
section
14
15
16
11
- 140