Mitsubishi Electric QJ81DL96 User Manual page 382

11
FUNCTIONS OF CONFIGURATION TOOL (MODULE SETTINGS)
Item
Attached data
setting
*4
Data
Data name
Attached time (date) type
File switching condition
hold true time
File creation time
Example
11
- 137 11.5 Data Logging Setting
11.5.15 Save
Set the data which are to be attached to the file name.
The content of the set data is attached to the file name.
Check to attach the data to the file name.
Adds <DATA1><DATA2> to the end of the "Format".
Displays the data specified at <DATA1><DATA2>.
To change the data to be attached to the file name, click
change it on the displayed "Data setting" screen.
Select the time (date) type to be attached to the file name.
Check to attach the time (date) when file switching conditions hold true.
Check to attach the time (date) which is when the storing file was created or when the
previous file switching was executed.
Displays the output image of the file name in a current format.
*1: When both of time and date are to be attached, the format is fixed as [YYYYMMDD_hhmmss].
Time cannot be attached before date.
*2: The number of "<DATA1>""<DATA2>" that can be set in the format is one each.
*3: A reserved word quoted with double quotes (") is attached as a string to the file name. A double
quote (") itself is not attached as a string to the file name.
The reserved word <DATA1><DATA2> cannot be attached to the file name.
Example: When "Format" is ["HDD"_LOTNo_<DATA1>_YYYYMMDD] and settings of <DATA1> are
"Device Head": D0, Word[signed], Zero padding, and "Number of total digits": 4.
HDD_LOTNo_0000_20090630_00000001.CSV
String
*4: When data cannot be sampled at the time of file switching, "NODATA" (fixed string) is added to the
saved file name.
POINT
(1) Regardless of selection of the simple setting or detailed setting, the saved file
number is always attached to the saved file name.
(2) Depending on the settings, the file switching process may take time.
In this case, a newer time than the time stamp of the first record in the logging
file is attached even if "File creation time" is checked.
(3) In the following cases, when "File creation time" is checked, the different time
from the time stamp of the first record in the logging file may be attached to
the file name depending on the length of file switching processing time or the
timing of executing file switching.
• "Trigger logging unit" is checked on "File switching timing".
• File switching is executed while logging is not executed.
(4) When "File creation time" is checked, the even number of seconds are
attached to the file name. The odd number of seconds is rounded down to the
even number of seconds.
Description
on the right of the input field and
Reserved word
(From the previous page)
Reference
-
-
Section 11.2.9
-
-
-