11
FUNCTIONS OF CONFIGURATION TOOL (MODULE SETTINGS)
Item
General sampling
Sampling interval
Time specification
Time interval specification
(1) Available time intervals
11
- 197
11.7 Report Setting
11.7.3 Sampling
• Set the data sampling interval in seconds. (0.1 to 0.9, 1 to 32767 seconds)
• Select when sampling data which exceeds 256 points.
• Select when sampling data from a programmable controller CPU via the network.
Samples data at the specified interval.
(0.1 to 0.9 seconds, 1 to 32767 seconds)
Samples data at the time interval of every specified hour/minute/second.
*1: When checked, there are the following restrictions.
• The creation trigger condition which can be set with the "Creation trigger" setting can only be a
single condition. (
• "Synchronize creation trigger with current value data" on the "Creation trigger" setting cannot
be checked. (
• Device data cannot be specified for the data condition on the "Period of time" setting.
(
Section 11.7.7)
• Information cannot be attached to the saved file name in the "Save" setting.
(
Section 11.7.8)
The following shows the time units and their intervals which can be specified for
sampling interval.
Hour: 1, 2, 3, 4, 6, 8, 12, 24
Minute: 1, 2, 3, 4, 5, 6, 10, 12, 15, 20, 30, 60
Second: 1, 2, 3, 4, 5, 6, 10, 12, 15, 20, 30, 60
Description
-
Section 11.7.6)
Section 11.7.6)
(From the previous page)
Reference
Section 9.2
-
-
(1) in this
section