Mitsubishi Electric QJ81DL96 User Manual page 503

13
FUNCTIONS OF CONFIGURATION TOOL (CONFIRMING MODULE OPERATION)
(1) Test result list
OK (ms)
TIMEOUT
Remark
(a) Test date
Displays the time when the response from the target device is received.
(b) Target device
Displays the IP address when an IP address is specified for the target device.
Displays the host name [IP address] when a host name is specified for the target
device.
Displays the tooltip by pointing the mouse cursor when all target devices are not
displayed on the screen.
(c) Execution result
Displays the following execution results.
Execution result
*1
Displayed when a ping packet is received normally.
Displayed when the target device did not receive the ping packet, or the high
speed data logger module did not receive the response packet from the target
device.
*1: When the response time is less than 1ms, 1ms is displayed after "OK".
Perform the PING test ( Appendix 2 PING Test) when checking the high
speed data logger module on the network from the personal computer.
Occurrence status
13.1 Diagnostics
13.1.10 Ping test
9
10
11
12
13
14
15
16
13
- 16