Sampling - Mitsubishi Electric QJ81DL96 User Manual

11
FUNCTIONS OF CONFIGURATION TOOL (MODULE SETTINGS)

11.7.3 Sampling

This section explains the settings for selecting the data sampling method for creation
trigger and current value data of the reports and specifying the data sampling interval.
For details on processes of each sampling method, refer to the following section.
 Section 9.2 Creation Trigger and Current Value Data Sampling
Setting screen
Item
High speed data sampling
Sampling interval
Each scanning cycle
Time specification
Sampling is made on a
consecutive series of devices.
High-speed monitoring of report creation trigger and current value sampling are
possible using the high speed data sampling function.
Samples data with each sequence scan.
Samples data at the specified interval. (1 to 32767ms)
*1
• Checked : Check this when five 'unchecked' settings already exist. Data
specified in the creation trigger setting can only be sampled and
monitored at a high speed.
• Unchecked : Different types of devices with inconsecutive device numbers can
be specified. The number of settings is up to 5 settings for all high
speed data logger module settings combined (data logging settings,
event logging settings, and report settings).
Description
-
11.7 Report Setting
11.7.3 Sampling
Reference
Section 9.2
-
(Continued on the next page)
11
- 196
9
10
11
12
13
14
15
16