11
FUNCTIONS OF CONFIGURATION TOOL (MODULE SETTINGS)
Item
General sampling
Sampling interval
Time specification
Time interval specification
(1) Available time intervals
11
- 85
11.5 Data Logging Setting
11.5.4 Sampling
• Set the data sampling interval in seconds. (0.1 to 0.9, 1 to 32767 seconds)
• Select when sampling data which exceeds 256 points.
• Select when sampling data from a programmable controller CPU via the network.
Samples data at the specified interval.
(0.1 to 0.9 seconds, 1 to 32767 seconds)
Samples data at the time interval of every specified hour/minute/second.
*1: When checked, there are the following restrictions.
• The trigger condition which can be set with the "Trigger" setting can only be a single condition.
( Section 11.5.9)
• Only the data set with the "Data" can be set as the data conditions in the "Trigger" setting.
( Section 11.5.10)
• Only the data set with the "Data" can be set as the data conditions in the "Period of time" set-
ting. ( Section 11.5.8)
• Only the data set with the "Data" can be set as the data conditions in the file switching condition
setting of the "Save" setting. ( Section 11.5.15)
• Information cannot be attached to the saved file name in the "Save" setting.
( Section 11.5.15)
The following shows the time units and their intervals which can be specified for
sampling interval.
Hour: 1, 2, 3, 4, 6, 8, 12, 24
Minute: 1, 2, 3, 4, 5, 6, 10, 12, 15, 20, 30, 60
Second: 1, 2, 3, 4, 5, 6, 10, 12, 15, 20, 30, 60
Description
-
(From the previous page)
Reference
Section 7.2.2
-
-
(1) in this
section