Procedure To Operate Without Installing High Speed Data Logger Module Configuration Tool - Mitsubishi Electric QJ81DL96 User Manual

4
SETTINGS AND PROCEDURES UP TO OPERATION
4.2.2 Procedure to operate without installing high speed data logger module
Configuration Tool
This section explains the procedure for using the high speed data logger module without
installing the high speed data logger module Configuration Tool.
Mount the high speed data logger module
to base unit.
Connect the high speed data logger module and configuration personal computer on a 1:1 basis.
Section 2.1.2 System configuration when performing initial setup, maintenance,
 Remark
Turn the programmable controller ON.
The high speed data logger module's RUN LED
turns ON.
Insert a CompactFlash card into
the high speed data logger module.
(Continued on the next page)
4
- 5 4.2 Configuration and Procedures Up to Operation

4.2.2 Procedure to operate without installing high speed data logger module Configuration Tool

Procedure up
to operation
High speed data logger module
*3
*1
Configure the web browser.
Section 5.3.1 (2) Configure the web browser
Connect to the high speed data logger
module with the web browser.
Section 5.3.1 (3) Connect with the web browser
Start the Configuration Tool online.
Section 5.3.1 (4) Configuration Tool start procedure
Select "Connection via hub" on the "Transfer Setup"
screen of the Configuration Tool
Section 12.1 Transfer Setup
(Continued on the next page)
Configuration personal computer
*2