Mitsubishi Electric QJ81DL96 User Manual page 349

11
FUNCTIONS OF CONFIGURATION TOOL (MODULE SETTINGS)
(1) Trigger condition setting screen
Setting screen
Item
Data conditions
*1
Compares data, and the trigger occurs when the condition is established.
Comparison
Select the target data from the data set with "Data logging setting".
Data name
To add a new data setting, select "(Add)" from the list box and click
Conditions
Select a comparison operator. (
Data/Constant Select the type of data to compare to the target data. ("Data" or "Constant")
Set the data or constant data (up to 16 characters) to compare to the target data.
Data name/
Data can be selected from the data set with "Data logging setting".
Constant value
To add a new data setting, select "(Add)" from the list box and click
At the time of change of
The trigger occurs when the value changes.
value
Select the data to monitor for the value change from the data set with "Data logging setting".
Data name
To add a new data setting, select "(Add)" from the list box and click
Fixed cycle The trigger occurs at the specified cycle. (1 to 86400 seconds)
Time interval specification The trigger occurs at the time interval of every specified hour/minute/second.
*2*3
The trigger occurs at the specified time.
Specifying a time of day
Month (Jan to Dec, Every)
Day (1 to 31, Every, Last)
Hour (00 to 23, Every)
Minute (00 to 59, Every)
Second (00 to 59)
At startup of module The trigger occurs when the high speed data logger module is powered ON or after reset.
One type of trigger condition can be specified on the screen below.
Description
-
.
)
.
.
11.5 Data Logging Setting
11.5.10 Trigger (single condition)
9
10
11
12
Reference
- 13
-
Section 11.5.6
Section 11.2.9
-
-
14
-
(1) (a) in this
section
(1) (b) in this
15
section
(1) (c) in this
section
(1) (d) in this
section
16
-
11
- 104