Mitsubishi Electric QJ81DL96 User Manual page 383

11
FUNCTIONS OF CONFIGURATION TOOL (MODULE SETTINGS)
Setting screen
Decimal integer format
Hexadecimal format
Zero padding
Number of total digits
(b) Output format screen
Specify the output format of data which are to be attached to the file name.
Item
Select this to output in a decimal integer format.
Select this to output in a hexadecimal integer format (characters are upper case).
Check to zero pad the output data.
If the number of digits of output data is less than the specified number of digits, the
data are zero padded.
Specify the number of total digits of output data at zero padding.
If the number of digits of the output data is the same as or more than the specified
number of total digits, the data are not zero padded.
POINT
When "Zero padding" is checked, '0' is appended to the saved file name according
to the specified number of total digits.
Example) When 'BAT<DATA1>_YYYYMMDD_ddd_hhmmss' is set as the format,
and the start device D0 for <DATA1>, Word [Unsigned], 4 for the
number of the total digits are specified
• For D0=12
BAT0012_20090410_Fri_154030_00000001.CSV
 '0' is appended to the value of D0 because the number of digits is
less than the specified number of total digits.
• For D0=32768
BAT32768_20090410_Fri_154030_00000001.CSV
 Only the value of D0 itself is output because the number of digits
is the same or more than the specified number of total digits.
Description
11.5 Data Logging Setting
11.5.15 Save
9
10
11
12
13
14
15
16
11
- 138