Mitsubishi Electric QJ81DL96 User Manual page 536

15
RECIPE FUNCTION
Function
(1) This instruction transfers device data in the programmable controller CPU to
(2) This instruction cannot be executed additionally while another RCPWRITE
(3) This instruction cannot be executed when the module stop error is being
(4) An error may occur when the instruction (RCPREAD) other than this
(5) This instruction cannot be executed in interrupt programs.
(6) Recipe files can be specified under the directory '/RECIPE/' in the
(7) The status of the execution and normal/error completion of the RCPWRITE
• Operation when the RCPWRITE instruction is executed
Turns the completion device (bit device) set for (
which the RCPWRITE instruction is completed, and turns OFF at the next END process.
When an error occurs, the error completion device set for (
corresponding error code is stored to the completion status (word device) set for (
15
- 24 15.6 Dedicated Instructions
15.6.2 Recipe Write (RCPWRITE)
the specified recipe file in the CompactFlash card.
instruction is being executed. (If attempted, the instruction is not processed.)
For errors detected at the instruction execution, the completion device (
and completion status display device (
occurred, or the data logging function cannot be performed (X5 is OFF). (If
attempted, an error occurs at the instruction completion.)
instruction is accessing the same file. Execute the instruction after setting the
interlock between the dedicated instructions which access the same file.
CompactFlash card.
instruction can be checked by the completion device (
status display flag (
D
(a) Completion device (
Turns ON at the END process of the scan in which the RCPWRITE instruction is
completed, and turns OFF at the next END process.
(b) Completion status display device (
Turns ON/OFF by the status of the RCPWRITE instruction completion.
Normal completion: Stays OFF without any changes
Error completion : Turns ON at the END process of the scan in which the
Sequence program
RCPWRITE instruction
Completion device
Completion device +1
+1) are not turned ON.
D
+1) set for the setting data.
+0)
D
+1)
D
RCPWRITE instruction is completed, and turns OFF at the
next END process.
+0) ON at the END process of the scan in
D
Scan END process
Recipe write instruction
+0) and completion
D
+1) is turned ON, and the
D
Scan END process Scan END process
When completed with an error
+0)
D
+1).
S