COMPLIANCE WITH THE EMC AND LOW VOLTAGE DIRECTIVES
To configure a system meeting the requirements of the EMC and Low Voltage Directives
when incorporating the Mitsubishi programmable controller (EMC and Low Voltage
Directives compliant) into other machinery or equipment, refer to Chapter 4 "EMC AND
LOW VOLTAGE DIRECTIVES" in the "Safety Guidelines" included with the CPU module
or the base unit used.
The CE mark, indicating compliance with the EMC and Low Voltage Directives, is printed
on the rating plate of the programmable controller.
For the compliance of this product with the EMC and Low Voltage Directives, refer to
Section 4.1.3 "Cables" in Chapter 4 "EMC AND LOW VOLTAGE DIRECTIVES" of the
"Safety Guidelines" included with the CPU module or the base unit used.
A
- 29