Mitsubishi Electric QJ81DL96 User Manual page 181

5
HIGH SPEED DATA LOGGER MODULE TOOL STARTUP
(3) Connect with the web browser
Start Internet Explorer on the personal computer and enter the high speed data logger
module address shown below. For the IP address setting, refer to the following
section.
 Section 11.4.1 Network setting
If the module is connected normally, the following screen is displayed.
POINT
• If the personal computer cannot be connected to the high speed data logger
module normally, issue the PING command from the personal computer to the
high speed data logger module to verify the connection.
For the method for issuing the PING command, refer to ( Appendix 2).
• Internet Explorer's "Temporary Internet Files" settings need to be configured.
For the configuration of "Temporary Internet Files" settings, refer to POINT in
Section 10.3.
5.3 Starting Configuration Tool
5.3.1 Online startup
1
2
3
4
5
6
7
8
5
- 16