Settings And Procedures Up To Operation; Handling Precautions - Mitsubishi Electric QJ81DL96 User Manual

4

SETTINGS AND PROCEDURES UP TO OPERATION

CHAPTER 4 SETTINGS AND PROCEDURES UP TO
This chapter explains the configuration and the procedures up to operating the high speed
data logger module in a system.

4.1 Handling Precautions

This section explains the precautions for handling the high speed data logger module
itself.
(1) Do not drop or apply severe shock to the high speed data logger module
(2) Tighten the module fixing screws within the following range.
4
- 1 4.1 Handling Precautions
OPERATION
POINT
(1) Read the safety precautions in this manual when using the high speed data
logger module.
(2) The mounting and installation environment of the high speed data logger
module is the same as that of the programmable controller CPU. For the
mounting and installation environment of the high speed data logger module,
refer to the following manual.
 QCPU Module User's Manual (Hardware Design, Maintenance and
Inspection)
case.
Screw location
*1
Module fixing screw (M3)
*1: The module can be easily fixed onto the base unit by using the hook at its top.
However, it is recommended to secure the module with the module fixing screw if the module is
subject to significant vibrations.
Tightening torque range
0.36 to 0.48 N·m