Mitsubishi Electric QJ81DL96 User Manual page 286

11
FUNCTIONS OF CONFIGURATION TOOL (MODULE SETTINGS)
(1) Daylight saving setting
Item
Enable daylight saving
Week specification
Start - Month
Start - Week
Start - Day of the week
Start - Switching time
End - Month
End - Week
End - Day of the week
End - Switching time
Date specification
Start - Month
Start - Day
Start - Switching time
End - Month
End - Day
End - Switching time
11
- 41 11.4 Common Setting
11.4.2 Time synchronization setting
Set the settings to use daylight saving time (summer time).
Setting screen
Set whether to enable the daylight saving time.
Select this to set the date at which to start or end the daylight saving time in terms of week and day of week.
Set the month to start daylight saving time.
Set the week to start daylight saving time.
Set the day of week to start daylight saving time.
Set the time to start daylight saving time.
Set the month to end daylight saving time.
Set the week to end daylight saving time.
Set the day of week to end daylight saving time.
Set the time to end daylight saving time.
Select this to set the date at which to start or end the daylight saving time in terms of day.
Set the month to start daylight saving time.
Set the day to start daylight saving time.
Set the time to start daylight saving time.
Set the month to end daylight saving time.
Set the day to end daylight saving time.
Set the time to end daylight saving time.
*1: When daylight saving time is enabled, the period of time from the specified start date/time to the
end date/time is defined as daylight saving time, and that period's start time and end time are
moved forward 1 hour.
POINT
• Before or after the start time/end time of daylight saving time, the data
logging function, event logging function, and report function may not start
with time as the condition. (When "Time interval specification" of general
data sampling is specified, the data are not sampled because the time
cannot be identified correctly while the time is adjusted one hour
backward at the end of the daylight saving time.)
• February 29 cannot be directly set. To specify February 29, select 'last
day of February'.
Description
*1