Period Of Time - Mitsubishi Electric QJ81DL96 User Manual

11
FUNCTIONS OF CONFIGURATION TOOL (MODULE SETTINGS)

11.6.10 Period of time

Specify the period for monitoring the event occurrence.
It is not necessary to configure these settings if always performing event logging.
Processes of period condition are the same as those of Data logging setting. Refer to the
following section.
 Section 7.4 Data Logging Periods
Item
Specify a period of time
Monitor the event during the period of
time which meets specified
*1
conditions
Don't monitor the event during the
period of time which meets specified
*1
conditions
Type of condition
Content
button
button
Operator for combination
button
11
- 171 11.6 Event Logging Setting
11.6.10 Period of time
Setting screen
Check if not always performing event logging.
Select this to perform event logging during the period corresponding to the
conditions displayed in the list.
Select this to not perform event logging during the period corresponding to the
conditions displayed in the list.
Displays the condition type.
(Data condition, date range, time range, day of week/week condition)
Displays the overview of the condition.
To check the content, select the corresponding row and click the
Displays the setting screen to edit the selected condition.
Deletes the selected condition.
Specify how to combine the rows of conditions. (OR, AND)
Shifts the selected row one row up or one row down.
*1: Restoration of already occurred events can be monitored even outside the event monitoring period.
If an event is restored outside the monitoring period, a restoration comment is output to the logging
file.
Description Reference
-
-
-
-
-
button.
(1) in this
section
-
(2) in this
section
-