Mitsubishi Electric QJ81DL96 User Manual page 592

18
TROUBLESHOOTING
Error code
Resend buffer excess
0B26
H
error
0B28
H
to System error
0B2A
H
0B2B Resend buffer write error
H
0B2C Resend buffer write error
H
0B2D Resend buffer write error
H
Resend buffer excess
0B2E
H
error
Initial SNTP server time
0B30
H
query failure error
SNTP server time query
0B31
H
error
CompactFlash card
0C00
H
access error
CompactFlash card
0C01
H
access error
CompactFlash card
0C02
H
access error
CompactFlash card
0C03
H
access error
Record number
0C05
H
specification error
0C06 No specified file error
H
18
- 25 18.2 Error Code List
Error name
The number of FTP resend buffered data
has exceeded the resend buffer size set in
the Configuration Tool.
Failed to write files to e-mail resend buffer.
Failed to write files to e-mail resend buffer.
Failed to write files to e-mail resend buffer.
The number of e-mail resend buffered
data has exceeded the resend buffer size
set in the Configuration Tool.
The initial time query to the SNTP server
failed.
The time query to the SNTP server failed.
The access to the CompactFlash card was
attempted when its access state was
"Preparing access".
The access to the CompactFlash card was
attempted when the file access was being
stopped.
The access to the unformatted
CompactFlash card was attempted.
The access to the CompactFlash card was
attempted while it is being formatted.
A record number out of the range is
specified in the RCPREAD instruction.
A file name which does not exist is
specified.
Description
-
(From the previous page)
Action
• Check the network settings.
• Clear the buffer by the FTP transfer
diagnostics of the Configuration Tool.
• Increase the resend buffer size.
• Please consult your local Mitsubishi
representative, explaining a detailed
description of the problem.
• Delete unnecessary files on the
CompactFlash card to ensure free
space.
• Replace the CompactFlash card.
• Write the settings again with the
Configuration Tool.
• Replace the CompactFlash card.
• Write the settings again with the
Configuration Tool.
• Delete unnecessary files on the
CompactFlash card to ensure free
space.
• Replace the CompactFlash card.
• Check the network settings.
• Clear the buffer by the e-mail send
diagnostics of the Configuration Tool.
• Increase the resend buffer size.
• Check the SNTP server address.
• Check if the set server is operating as
an SNTP server.
• Check if it is connected to the network.
• Access the CompactFlash card again
when the access state is "Accessible".
 Section 13.1.6 CompactFlash card
diagnostics
• Check if a CompactFlash card is
inserted.
• Execute "Access restart" and retry.
 Section 13.1.6 CompactFlash card
diagnostics
• Turn the clear file access stop request
(Y3) ON, and retry after the file access
status (X2) is turned OFF.
• After formatting the CompactFlash card,
store recipe files to the CompactFlash
card, and retry.
• After formatting the CompactFlash card,
store recipe files to the CompactFlash
card, and retry.
• Correct the control data of the
RCPREAD instruction.
 Section 15.6.1 Recipe read
(RCPREAD)
• Specify the recipe file exists in the
RECIPE folder.
(Continued on the next page)