2
SYSTEM CONFIGURATION
2.1.3 System configuration during operation
This section explains the system configuration when operating the high speed data logger
module.
(1) For a connection via a hub
In this method, the high speed data logger module and a personal computer are
connected through a local area network via a hub.
The high speed data logger module's IP address must be specified when connecting
via a hub.
High speed data logger module
POINT
(2) For a direct connection
In this method, the high speed data logger module and a configuration/display
personal computer are directly connected on a 1:1 basis through an Ethernet cable
(crossing cable) without a hub.
The high speed data logger module's IP address does not need to be specified to
perform communication when directly connecting. (The broadcast is used to perform
communication.)
The high speed data logger module can be only connected over a LAN
connection.
The module cannot be connected via Internet.
High speed data logger module
Twisted pair cable
Ethernet
Hub
Twisted pair cable
Twisted pair cable
(crossing cable)
Ethernet
2.1 System Configuration
2.1.3 System configuration during operation
Server personal computer
Configuration/display
personal computer
Configuration/display
personal computer
2
- 3
1
2
3
4
5
6
7
8