Mitsubishi Electric QJ81DL96 User Manual page 244

10
OTHER FUNCTIONS
(2) Resend function
10
- 17 10.6 E-mail Function
An e-mail resend is attempted every 10 seconds when a module cannot access the
mail server and the e-mail transmission failed due to a network failure.
E-mail transmission data 4
E-mail transmission data 1
E-mail transmission data 2
E-mail transmission data 3
Resend buffer
E-mail transmission data 1
E-mail transmission data 2
E-mail transmission data 3
E-mail transmission data 4
Resend buffer
POINT
(1) When the resend function is enabled, 'E-mail transmission error (0B13
not detected even if a module cannot access the mail server and the e-mail
transmission failed.
However, 'E-mail transmission error (0B13
function is enabled when a mail server processing error occurs and data
cannot be transferred due to an error such as incorrect password settings or
high load on the mail server.
(2) The transmission files which exceed the number of resending buffer specified
with the e-mail setting are not applicable to the resend function. Specify the
sufficient send buffer size.
(3) Buffer usage rate check and buffer clear can be executed by the E-mail send
diagnostics ( Section 13.1.4).
After writing the e-mail setting, the buffer clear can also be executed by the
reset of the programmable controller CPU or the update of the settings.
(4) 'E-mail transmission test' is not applicable to the resend function.
Disconnected
Logging file
CompactFlash card
Recover
Logging file
Logging file
To attach a logging file,
specify a logging file from
the e-mail transmission data,
and resend it.
CompactFlash card
Mail server
Mail server
)' is detected even if the resend
H
)' is
H