Mitsubishi Electric QJ81DL96 User Manual page 149

4
SETTINGS AND PROCEDURES UP TO OPERATION
POINT
4.2.1 Procedure to operate by installing high speed data logger module Configuration Tool
*1: To check the high speed data logger module hardware, perform a self-diagnostics test as
necessary.
 Section 4.6 Self-Diagnostics Tests
*2: If you forget your account or cannot log in to the high speed data logger module, eject the
CompactFlash card from the high speed data logger module, and continue the following steps.
For the method for ejecting the CompactFlash card, refer to the following section.
 Section 16.5 Operations for Ejecting and Reinserting CompactFlash Card
*3: For precautions when using a CompactFlash card and the method for inserting it, refer to the
following sections.
 Section 16.3 Precautions when Using CompactFlash Card
 Section 16.4 Operations for Inserting CompactFlash Card
*4: When the settings are completed abnormally, check the following and execute the PING command
again.
 Appendix 2 PING Test
• Network settings for the high speed data logger module and configuration personal computer
• Connection status for the high speed data logger module and configuration personal computer
To check the logging results with graphs and lists, use GX LogViewer. For the
procedure of using GX LogViewer, refer to the following manual.
 GX LogViewer Version 1 Operating Manual
4.2 Configuration and Procedures Up to Operation
1
2
3
4
5
6
7
8
4
- 4