Mitsubishi Electric QJ81DL96 User Manual page 308

11
FUNCTIONS OF CONFIGURATION TOOL (MODULE SETTINGS)
(1) Sender account settings
Item
SMTP server name
E-mail address
SMTP port number
button
(2) Authentication setting screen
This server has authentication
requirements which have to be met
Method of authentication
User name
Password
Confirm password
POP server name
POP port number
11
- 63 11.4 Common Setting
11.4.5 E-mail setting
Set the account necessary for the high speed data logger module to send e-mails.
Setting screen
Set the SMTP server name with an IP address or a domain name (up to 64 characters).
Set the e-mail address for the high speed data logger module (up to 64 characters).
Specify the port number (1 to 65535) when accessing the SMTP server.
Displays the "Authentication setting" screen to configure the authentication settings for
sending e-mail.
*1: When the SMTP server name is set with a domain name, the DNS server needs to be set in "DNS
server setting" on the Network settings screen (Section 11.4.1 (2)).
Setting screen
Item
button
button
*1: Select the authentication method when sending e-mail. Specify according to the mail server.
*2: Required when the authentication method is set to "POP before SMTP".
Description
Check this when authentication is required to send e-mail.
Select the authentication method when sending e-mail.
Enter the mail server user name used for authentication when sending e-
mail (Up to 32 characters).
Enter the mail server password used for authentication when sending e-
mail (Up to 16 characters).
Enter the password again for verification.
Enter the POP server name (Up to 64 characters).
Specify the port number (1 to 65535) when accessing the POP server.
Reflects the settings and closes the screen.
Discards the settings and closes the screen.
*1
Description
*1
*2
-
-
-
(2) in this
section
*2