Drive Name - Mitsubishi Electric Q12DCCPU-V User Manual

8
MEMORIES AND FILES

(2) Drive name

Memory name
Built in the C Controller module
CompactFlash card
The C Controller module recognizes the following memories by drive name.
• Standard RAM
• Standard ROM
• CompactFlash card
In the user program, a drive name shown in Table 8.3 is used to specify the relevant
memory (mentioned above).
These drive names are also used for specifying the target when reading and writing a
file to and from the development environment (personal computer) using FTP.
Table 8.3 Memories and drive names
Standard RAM
Standard ROM
Work RAM
* 1 The drive name in the sample program (MakeRAMDisk.c).
Do not use "/RAM", "/ROM", "/CF", and "/SYSTEMROM" for a drive name of a RAM disk.
The system may not operate properly if any of the above drive name is used.
Drive name
Q12DCCPU-V Q06CCPU-V
/RAM
/RAMDISK
/CF
8.1 Memories of the C Controller Module
8.1.1 User memories
Q06CCPU-V-B
/ROM
*1
8
- 4
1
2
3
4
5
6
7
8