Removing The Compactflash Card - Mitsubishi Electric Q12DCCPU-V User Manual

6
PREPARATORY PROCEDURES AND SETTING

(2) Removing the CompactFlash card

(a) Removing the CompactFlash card
Remark
(b) Inserting a dummy CompactFlash card
(c) Closing the front cover
Open the C Controller module front cover, and remove the CompactFlash card.
Front cover
1) Open the front cover.
CompactFlash card slot
Figure 6.50 Removing the CompactFlash card (for the Q12DCCPU-V)
1) Put your finger on the bottom of the C Controller module front cover, and open
the front cover.
2) Press the EJECT button to remove the CompactFlash card.
When having difficulty in replacing the CompactFlash card, use of the following
tweezers is recommended.
Product: Plastic tweezers
Model: NK-2539
Figure 6.51 Using plastic tweezers for replacing the CompactFlash card
While no CompactFlash card is used, a dummy CompactFlash card must be
used.
Confirm that the C Controller module front cover is closed with a clicking sound.
6.8 Inserting/Removing a CompactFlash Card and Access Stop
6.8.1 Inserting/removing the CompactFlash card
EJECT button
2) Press the
EJECT button.
CompactFlash card
1
2
3
4
5
6
7
8
6
- 63