Mitsubishi Electric Q12DCCPU-V User Manual page 101

4
FUNCTIONS
Function
Set whether to clear or hold the outputs to output modules, I/
Error time output mode
O combined modules, and intelligent function modules when
setting
a stop error occurs in the C Controller module.
Hardware error time CPU Set whether to stop or run the C Controller module when a
operating mode setting hardware error occurs in an intelligent function module.
Intelligent function module Configure the settings for intelligent function modules and
and interrupt module interrupt modules. (For details, refer to the manual for each
switch setting module.)
Detects a hardware error or a user program error of the C
Watchdog timer (WDT)
Controller module.
Interrupt from intelligent Issues an interrupt event (I50 to I255) in response to an
function module interrupt request from an intelligent function module.
Connection between C
Controller module and Accesses a GOT through the RS-232 interface of the C
GOT (microcomputer Controller module.
connection)
From the Telnet tool of the development environment
(personal computer), allows simple remote debugging (task
information display, memory dumping, etc.) of the C
Telnet function
Controller.
Without using Workbench or Tornado, simple remote
debugging is available.
Communication function Connects a peripheral device (such as GX Developer) to the
with peripheral devices Ethernet port on the C Controller module with an Ethernet
through an Ethernet port cable to perform communications.
Unmounting CompactFlash card can be unmounted with the RESET/
CompactFlash card SELECT switch on the C Controller module.
Restricts parameter writing from FTP or each utility and use
Login user access
of the Telnet function, by setting (adding/deleting) login users
restriction
for the C Controller module.
Table 4.1 List of C Controller module functions (continued)
Description
Availability
Q12DC
CPU-V
: Available, : Available but partially restricted,
4.1 Function List
Reference
Q06C Q06C
section
CPU-V CPU-V-B
Page 4-36,
Section 4.9
Page 4-37,
Section 4.10
Page 4-38,
Section 4.11
Page 4-40,
Section 4.12
Page 4-42,
Section 4.13
Page 4-47,
Section 4.14
Page 4-48,
Section 4.15
Page 4-53,
Section 4.16
Page 6-24,
Section 6.4,
Page 6-67,
Section
6.8.3
Page 6-88,
Section 6.11
: N/A
(To the next page)
4
- 2
1
2
3
4
5
6
7
8