Settings And File Conditions After The Operations; File Conditions - Mitsubishi Electric Q12DCCPU-V User Manual

6
PREPARATORY PROCEDURES AND SETTING

(4) Settings and file conditions after the operations

6
- 74 6.10 Initializing/Changing Mode of C Controller Module
6.10.1 Initializing/Changing mode of Q12DCCPU-V
The following table indicates the settings and file conditions after executing the
"Default IP setting" mode or performing the module initialization setting procedure.
File type
IP address setting
Event history file
C Controller module parameters
CC-Link module parameters
MELSECNET/H module parameters
CC-Link IE controller network module
parameters
Intelligent function module parameters
Script file
User program
Files used in the user program
* 1 The setting returns to the default IP address.
Default IP address for CH1: 192.168.3.3
Default IP address for CH2: No setting
* 2 Previous information is deleted.
* 3 Previous data before execution of the default IP setting mode are retained.
* 4 The startup script file "STARTUP.CMD" in the standard RAM is deleted.
The "STARTUP.CMD" saved in the standard RAM before execution of the default IP setting mode
is renamed to "STARTUP.BAK" and saved to the standard RAM. (If "STARTUP.BAK" already
exists, it is overwritten.)
Table 6.21 File conditions
Settings and file conditions
Default IP setting
*1
*3
*3
*3
*3
*3
*4
*3
*3
Module initialization
setting
*1
*2
Default parameters
Deleted
Deleted
Deleted
Deleted
Deleted
Deleted
Deleted