Mitsubishi Electric Q12DCCPU-V User Manual page 606

APPENDICES
APPX
- 42 Appendix 10 Connection with MX Component
Appendix 10.1 Accessing the host station
6) Input a comment, and click the
POINT
• When the access destination is the C Controller module, device function
settings need to be configured on the <<Device settings>> tab of the C
Controller setting utility.
For details, refer to the following.
C Controller Module User's Manual (Utility Operation,
Programming)
• To connect MX Component to the C Controller module via Ethernet, built-
in Ethernet port open settings need to be configured on the <<System
settings>> tab of the C Controller setting utility.
For details, refer to the following.
C Controller Module User's Manual (Utility Operation,
Programming)
Finish
button.