Availability Of File Operation - Mitsubishi Electric Q12DCCPU-V User Manual

8
MEMORIES AND FILES
The following shows the availability of each operation.
File operation
C Controller module
*1
parameters
*1
CC-Link module parameters
MELSECNET/H module
*1
parameters
CC-Link IE controller network
*1
module parameters
Intelligent function module
*1
parameters
Script file
User program
File used in the user program
Table 8.7 Availability of file operation
1)
Read
Write
Verify
parameters
Read
Write
Verify
parameters
Read
Write
Verify
parameters
Read
Write
Verify
parameters
Read
Write
Read
Write
Read
Write
Read
Write
* 1 Parameter files are stored in the "Melco" and "Mqbf" directories and lower layer of the standard
RAM or standard ROM.
* 2 To backup a parameter file to a CompactFlash card or another memory, copy the data in "Melco"
and "Mqbf" directories and lower layer under the "/RAM" or "ROM" drive.
* 3 To restore a parameter file from a CompactFlash card or another memory, copy all the previously
backed-up data (*2 above) to the "/RAM" or "/ROM" drive after the following operation.
Q12DCCPU-V: "/RAM" drive formatting (
Q06CCPU-V(-B): "/ROM" drive formatting (
* 4 When SW3PVC-CCPU is installed, the script files used for backup or restoration of parameter files
are registered.
For sample programs, refer to the following.
C Controller Module User's Manual (Utility Operation, Programming)
Availability
2) 3)
Page 6-77, Section 6.10.1 (6))
Page 6-85, Section 6.10.2 (4))
8.2 File Operation and Handling Precautions
8.2.1 File operation
4) 5) 6)
*2 *2 *4
*3 *3 *4
*2 *2 *4
*3 *3 *4
*2 *2 *4
*3 *3 *4
*2 2 *4
*3 3 *4
*2 *2 *4
*3 *3 *4
: Available
8
1
2
3
4
5
: N/A
6
7
8
- 8