Setting Methods For The Q12Dccpu-V - Mitsubishi Electric Q12DCCPU-V User Manual

4
FUNCTIONS

[Setting methods for the Q12DCCPU-V]

The following explains how to set the initial value of 30 seconds.
• Setting it while the C Controller module is in operation
1) Connect the line to the C Controller module with the Telnet tool.
2) Execute the following two Sysctl() commands with the Telnet tool to set
the timeout time to the initial value.
Sysctl("net.inet.tcp.keepidle = 22000")
Sysctl("net.inet.tcp.keepintvl = 1000")
3) Close the Telnet connection.
• Setting it when the C Controller module is started
1) Describe the following two Sysctl() commands on the script file,
"STARTUP.CMD".
Sysctl("net.inet.tcp.keepidle = 22000")
Sysctl("net.inet.tcp.keepintvl = 1000")
2) Write the above script file, "STARTUP.CMD" to a CompactFlash card,
and insert it into the C Controller module.
3) Upon start of the C Controller module, the timeout time is set to the
initial value.
4.15 Telnet Function
1
2
3
4
5
6
7
8
4
- 50