Chapter 5 Monitoring; Explanation Of Monitor Signals; Name And Description Of The Monitor Signals - Mitsubishi Electric MELSERVO-JET MR-JET User Manual

5
MONITORING
Summary
The status of servo motor speed, torque, bus voltage, and other areas of the servo amplifier can be checked with the
engineering tools. This chapter shows an example when using MR Configurator2 as the engineering tool.
Items that can be monitored with "Display All" can also be monitored by objects. For details, refer to User's Manual (Object
Dictionary).
5.1

Explanation of monitor signals

The name and description of the monitor signals used in the servo amplifier and the signal block diagram are as follows.

Name and description of the monitor signals

The following shows the types of monitor signals.
Monitor signal
Monitor signal (analog)
Monitor signal (digital)
This chapter shows the name and description of each monitor signal. The unit and other areas may differ depending on the
control mode and display method. For "Display All" and the display of the graph in the monitor, refer to the following.
Page 211 Checking with MR Configurator2
Description
The data, such as the servo motor speed, indicated in an analog form
The data, such as INP (In-position), indicated by on and off of bits
5 MONITORING
5.1 Explanation of monitor signals
5
203