Mitsubishi Electric Q12DCCPU-V User Manual page 391

12
CONCEPT OF MULTIPLE CPU SYSTEM
<<I/O assignment settings>> tab
2) Output (Y) data are loaded from the modules indicated in Table 12.11, which
are mounted on a main base unit and extension base units.
Table 12.11 Modules from which outputs are loaded
Type setting in the
of C Controller setting utility
None
Output
I/O mix
Intelli.
3) Data assigned to empty slots and cyclic data controlled by other CPUs on the
following network cannot be read out directly from the refresh target devices.
To the following read cyclic data, assign the refresh target device to the auto
refresh area in the CPU shared memory.
• CC-Link IE controller network
• MELSECNET/H
• CC-Link, etc.
(b) When "All CPUs can read all outputs" is deselected
On/off data cannot be loaded from output (Y) modules and intelligent function
modules controlled by other CPUs (they remain off).
12.4 Access Ranges Between a CPU Module and Other Modules
Mounted module
Output module
I/O combined module
Intelligent function module
Output module
I/O combined module
Intelligent function module
12.4.2 Access to non-controlled modules
9
10
11
12
13
14
15
16
12
- 17