Mitsubishi Electric Q12DCCPU-V User Manual page 605

APPENDICES
4) Set the programmable controller side interface as follows, and click the
Next >
• Select "CPU module" for "PLC side I/F".
• When setting a host name for "Host (IP Address)", input the name of the
• C Controller modules cannot be searched by the
5) Set the network as follows, and click the
• Select "Host station" for "Station type".
• Select the type of the CPU module to be accessed for "CPU type".
• Select the number of the CPU module to be accessed for "Multiple CPU".
button.
hosts file in no more than 64 characters.
When setting an IP address, input the IP address of the C Controller
module to be connected.
Find CPU (Built-in Ethernet port) on network
Appendix 10 Connection with MX Component
Appendix 10.1 Accessing the host station
button.
Next >
button.
APPX
A
I
- 41