Mitsubishi Electric Q12DCCPU-V User Manual page 467

15
STARTING A MULTIPLE CPU SYSTEM
Set parameters other than these
multiple CPU system parameters.
Save the set parameters into a file.
Remark
(From the previous page)
End
Figure 15.6 Parameter setting procedure for creating a new multiple CPU system
For C Controller setting utility, refer to the following.
C Controller Module User's Manual (Utility Operation, Programming)
15.2 Setting Parameters Added for Multiple CPU Systems
In the Type column in the <<I/O
assignment>> tab, select "CPU (Empty)"
for a slot where no module is mounted.
Click the Detailed settings button to
open the Detailed settings screen.
Control CPU (setting required)
Select a control CPU (No.1 to No.4) for
each slot.
The setting is not available for
intelligent function modules of function
version A.
15.2.3 When creating a new system
9
10
11
12
13
14
15
16
15
- 13