Connection Between C Controller Module And Got; Microcomputer Connection Of Got - Mitsubishi Electric Q12DCCPU-V User Manual

4
FUNCTIONS
4.14

Connection Between C Controller Module and GOT

(Microcomputer Connection)
(1) Connection between the C Controller module and GOT (Microcomputer
Virtual devices inside GOT
D0
D100 000A
D163 0362
D4095
Remark
4
- 47 4.14 Connection Between C Controller Module and GOT (Microcomputer Connection)
connection)
By connecting an RS-232 cable from a GOT to the C Controller module's RS-232
interface, the C Controller module can communicate with the GOT using virtual
devices inside the GOT.
For this communication, create a user program referring to a sample program
included in SW3PVC-CCPU.
Write/Read command
S
T
RW 0100 000A 0163 0362
X
Interrupt output
Figure 4.22 Microcomputer connection of GOT
1. For the sample program, refer to the following.
C Controller Module User's Manual (Utility Operation, Programming)
2. For the microcomputer connection of GOT and available communication
commands, refer to the following.
Manual for the GOT
Q12DCCPU-V
E
T
D3
X
Q06CCPU-V Q06CCPU-V-B
C Controller module