Details Of I/O Assignment By C Controller Setting Utility - Mitsubishi Electric Q12DCCPU-V User Manual

7
I/O NUMBER ASSIGNMENT
7.6.2
The "Type" (module type), "Points" (I/O points), and "Start X/Y" (start I/O number) can be
assigned for each slot of base units.
For example, to change the I/O points of a specific slot, only the respective point value can
be changed.
To the items that do not need setting, the mounting status of the base unit is applied.
(1) I/O assignment setting
7
- 19 7.6 I/O Assignment by C Controller Setting Utility

7.6.2 Details of I/O assignment by C Controller setting utility

Details of I/O assignment by C Controller setting utility
Set I/O assignment in the <<I/O assignment settings>> tab of C Controller setting
utility.
(a)
(a) Slot
Slot No. and what number of the slot on what number of the stage are displayed
for each slot.
When a base unit is set into Auto mode, "*" indicates the base unit stage number,
and the slot number counted from Slot 0 of the main base unit is displayed.
Q12DCCPU-V
(b) (c) (d)
Figure 7.16 I/O assignment settings
Q06CCPU-V Q06CCPU-V-B
(e)