Ethernet Connection - Mitsubishi Electric Q12DCCPU-V User Manual

APPENDICES
APPX
- 28 Appendix 9 Connection with GX Works2/GX Developer
Appendix 9.1 When accessing another CPU of a multiple CPU system
(b) Ethernet connection
To access another CPU module of a multiple CPU system from the C Controller
module via Ethernet, follow the procedure below.
POINT
• To connect GX Works2 to the C Controller module via Ethernet, built-in
Ethernet port open settings need to be configured on the <<System
settings>> tab of the C Controller setting utility.
For details, refer to the following.
C Controller Module User's Manual (Utility Operation,
Programming)
1) Navigation window
2)
3)
4)
5)
Select [Connection Destination].