Mitsubishi Electric Q12DCCPU-V User Manual page 363

11
MULTIPLE CPU SYSTEM CONFIGURATION
(3) W
CompactFlash card
(sold separately)
Battery
POINT
hen using the multiple CPU high speed main base unit (Q3 DB)
*6
*7
C Controller module
Extension cable
* 1 The Q12DCCPU-V and a Motion CPU (except the Q172DCPU and Q173DCPU) cannot be
installed on the same base unit.
* 2 To a Motion CPU, a CompactFlash card and a battery cannot be installed.
* 3 Use a Q series power supply module.
The current consumption must be the rated output current or less.
Slim type power supply modules and redundant power supply modules cannot be used.
* 4 No power supply module is required for the Q5 B extension base unit.
* 5 The control CPU of a Motion module must be a Motion CPU.
* 6 For the Q06CCPU-V-B, CompactFlash cards cannot be used.
* 7 For the Q06CCPU-V(-B), the Q7BAT cannot be used.
Figure 11.3 When a multiple CPU high speed main base unit is used
For combinations of configurable CPU modules, refer to the following.
Page 12-1, Section 12.1
Motion
*1
*2
CPU
Q3 DB multiple CPU high speed main base unit
Q series power supply module, I/O module,
intelligent function module, Motion module
Q5 B extension base unit
Q6 B extension base unit
11.1 System Configuration
11.1.1 Devices used for each base unit
*3
*5
*4
*3
11
- 4
9
10
11
12
13
14
15
16