Accessing Other Stations - Mitsubishi Electric Q12DCCPU-V User Manual

APPENDICES
Appendix 10.2 Accessing other stations
To access other stations from the C Controller module via USB or Ethernet, follow the
procedure below.
1) Start the communication setting wizard from the communication setting utility.
2) Select a value for logical station number, and click the
3) Set "PC side I/F" and "PLC side I/F" in the same way as for accessing the host
station.(
4) Set the network as follows, and click the
• Select "Other station" for "Station type".
• Select "QCPU (Q mode)" for "PLC mode".
• Select the network type to be accessed for "Network".
• Select the network to be accessed for "Network route".
* 1 "C24" and "Ethernet" cannot be specified as a network type.
* 2 Setting items vary depending on a selected "Network".
Page App-37, Appendix 10.1)
Appendix 10 Connection with MX Component
Appendix 10.2 Accessing other stations
Next > button.
Next >
button.
*1
*2
APPX
A
I
- 43