16
TROUBLESHOOTING
16.3
Actions to be Taken When the ERR. LED is On or Flashing
If a stop or continuation error occurs in the C Controller module, the color of the
corresponding error box changes from
<<Module information>> tab of C Controller setting utility, and an error code is displayed.
The following describes respective error details and how to handle each error when the
corresponding box is changed from
(1) Checking the error information
When the ERR. LED is on or flashing, check the error information as follows:
1) Click [Start]
[All Programs]
setting utility].
C Controller setting utility is activated.
2) Click the <<Module information>> tab.
Start monitoring
3) Click the
4) An error code is displayed on the screen.
Figure 16.22 Checking the error information
16.3 Actions to be Taken When the ERR. LED is On or Flashing
Q12DCCPU-V
(white) to
(red) in "Error information" in the
(white) to
(red).
[MELSEC]
[C Controller]
button.
An error code is displayed when a box
corresponding to an error is changed
from
The error code is updated constantly during
monitoring.
For details of each error code,
refer to (1) in this section
If an error occurs, the corresponding box is
changed from
For respective error items and details,
refer to (1) in this section
Q06CCPU-V
Q06CCPU-V-B
[C Controller
(white) to
(red).
(3) in this section.
(white) to
(red).
(2) in this section.
16
- 34
9
10
11
12
13
14
15
16