Switch Setting Of Intelligent Function Modules And Interrupt Modules - Mitsubishi Electric Q12DCCPU-V User Manual

4
FUNCTIONS

(3) Switch setting of intelligent function modules and interrupt modules

1) Configure I/O assignment settings.
(4) Precautions
4
- 39 4.11 Switch Settings for I/O and Intelligent Function Modules
The switches of intelligent function modules and interrupt modules are set in "I/O
assignment" in << I/O assignment settings>> of C Controller setting utility.
1) Configure the I/O assignment settings.
Switch settings
2) Select
3) Set the switches of each module.
Figure 4.16 Switch setting
(a) For the switch settings of intelligent function modules and interrupt modules, refer
to the following.
Manual for each intelligent function module or interrupt module
(b) The settings for intelligent function modules and interrupt modules take effect
when:
• The C Controller system is powered on.
• The C Controller module reset is completed.
.
2) Click the Switch settings button.
3) Set the intelligent function module
and interrupt module switches.