Changing Clock Data By A User Program; Reading Clock Data By A User Program - Mitsubishi Electric Q12DCCPU-V User Manual

4
FUNCTIONS
(d) Changing clock data by a user program
(e) Reading clock data by a user program
Remark
When changing clock data by a user program, use the QBF_SetTime function.
If any other clock data setting function is used, correct clock data will not be set in
the C Controller module.
When reading clock data by the user program, functions other than QBF_GetTime
can be used.
For the bus interface functions, refer to the following.
C Controller Module User's Manual (Utility Operation, Programming)
4.7 Clock Function
1
2
3
4
5
6
7
8
4
- 32