Mitsubishi Electric Q12DCCPU-V User Manual page 209

5
ACCESS VIA NETWORK MODULES
(2) Refresh parameters
The refresh parameters are parameters by which data are transferred from the link
devices (LX, LY, LB, and LW) of a CC-Link IE controller network module to the internal
link device buffers (LX, LY, LB and LW buffers) of the C Controller module for use in
the user program.
(a) Link refreshable devices
(b) Setting refresh parameters
Up to 64 transfer settings are allowed for each CC-Link IE controller network
module.
The following transfer settings are available.
• Transfer the link side device (LX) data to the CPU side device (LX buffer).
• Transfer the link side device (LY) data to the CPU side device (LY buffer).
• Transfer the link side device (LB) data to the CPU side device (LB buffer).
• Transfer the link side device (LW) data to the CPU side device (LW buffer).
Set refresh parameters in the Refresh parameter settings screen activated from
the <<Parameter settings>> tab of CC IE Control utility.
Figure 5.53 Refresh parameter settings screen
5.4 CC-Link IE Controller Network Module Access Function
5.4.4 Link device refresh setting
1
2
3
4
5
6
7
8
5
- 55