Mitsubishi Electric Q12DCCPU-V User Manual page 538

16
TROUBLESHOOTING
Table 16.8 Common error codes returned by bus interface and MELSEC data link functions (continued)
Return value
(HEX)
-28664
Data transmission area occupied.
(0x9008)
-28665
No registration data error
(0x9007)
-28666
Data length error
(0x9006)
-28668 Reply data stored error
(0x9004) Reply data has already been stored.
-28669 Area No. error
(0x9003) The specified area No., offset address, or mode is out of range.
-28671
Module identification error
(0x9001)
-28672
Processing code error
(0x9000)
16
- 67 16.4 Error Code List
16.4.1 Error codes and actions (for errors occurred in function execution)
Error description
* 1 In a single CPU system, reset the C Controller module.
In a multiple CPU system, reset CPU No. 1.
Corrective action
Retry.
Reboot the operating system.
Reboot the operating system.
Resend the request.
Check the area No., offset address, or mode.
Check the parameter.
Check the specified module.
Reboot the operating system.
Reinstall software package.
Reboot the operation system.
*1
*1
*1
*1