4
FUNCTIONS
4.3.1
Remote RUN/STOP
For the remote RUN/STOP operation from a programmable controller CPU, refer to the
manual for the programmable controller CPU.
(1) What is remote RUN/STOP?
The remote RUN/STOP is a control from the user program or development
environment (personal computer), by which the C Controller module can run or stop
with its RUN/STOP/MODE switch set to RUN.
(2) Application of the remote RUN/STOP
The remote RUN/STOP is useful when:
(3) Operation in the remote RUN/STOP
The remote RUN/STOP makes the C Controller module behave as described below.
(a) Remote STOP
(b) Remote RUN
• The C Controller module is out of reach.
• External signals are used to run or stop the C Controller module inside a control
panel.
As soon as remote STOP is requested, the C Controller module is stopped, and
the output (Y) to each module and buffer memory writing from the user program
are disabled.
These operations are executable, however, from <<Module monitoring>> of C
Controller setting utility.
Executing remote RUN in the remote STOP status will change the C Controller
module status to RUN again, enabling the output (Y) to each module and buffer
memory writing from the user program.
Q12DCCPU-V
Q06CCPU-V
4.3 Remote Operation Function
4.3.1 Remote RUN/STOP
1
Q06CCPU-V-B
2
3
4
5
6
7
8
4
- 6