4
FUNCTIONS
(6) Methods for remote RESET
The remote RESET can be executed by either of the following two methods: "Using
user program" and "Using development environment (personal computer).
(a) Using user program
Remark
(b) Using development environment (personal computer)
1) Set to "RESET".
Figure 4.5 Remote RESET from development environment (personal computer)
Execute a bus interface function (QBF_Reset) from the user program to perform
remote RESET.
For the bus interface function, refer to the following manual.
C Controller Module User's Manual (Utility Operation, Programming)
In <<Online operation>> of C Controller setting utility, perform as described below.
1) When files are opened in a user program on the C Controller module, close all
programs.
2) Set "Remote operation" to "RESET".
Execute
3) Click
to execute remote RESET.
4.3 Remote Operation Function
4.3.3 Remote RESET
1
2
3
4
5
6
2) Click
Execute button.
7
8
4
- 14