14
PARAMETERS ADDED FOR MULTIPLE CPU
SYSTEMS
14.1.1
(1) Number of CPUs
Number of CPUs
(2) Reserving an empty slot
"CPU (Empty)" setting
Setting the number of CPUs (required)
In the <<Multiple CPU settings>> tab of C Controller setting utility, select the number
of CPU modules to be used in the multiple CPU system.
Figure 14.1 Setting the number of CPUs
To reserve an "Empty slot" for mounting a CPU module in the future, select "CPU
(Empty)" in the <<I/O assignment settings>> tab of C Controller setting utility.
(
Page 12-1, Section 12.1)
(Example) When reserving one out of four CPU slots for future use
Set 4 for the Number of CPUs in <<Multiple CPU settings>>, and select "CPU
(Empty)" for Slot 3 (the 4th CPU module) in <<I/0 assignment settings>>.
Figure 14.2 Reserving an empty slot
Q12DCCPU-V
14.1 Parameter List
14.1.1 Setting the number of CPUs (required)
Q06CCPU-V
Q06CCPU-V-B
14
- 4
9
10
11
12
13
14
15
16