Mitsubishi Electric Q12DCCPU-V User Manual page 560

16
TROUBLESHOOTING
(5) Confirming the hardware self-diagnostic test and initialization setting
Remark
16
- 89 16.5 Hardware Self-Diagnostic Function
16.5.2 Hardware self-diagnostic test and initialization setting of the Q06CCPU-V(-B)
result
(a) Normal completion
1) The flashing LED turns off during the diagnostics and setting.
Figure 16.29 LED indication for normal completion (for the Q06CCPU-V)
2) Turn the power off to finish the hardware self-diagnostic mode.
Standard ROM format setting (formatting of the standard ROM) takes effect next
time the C Controller module is started after the setting.
When the setting is completed normally, the RUN and USER LEDs are turned off
and the MODE LED starts flashing green.
RUN
On
CF CARD
CH2 SD/RD
MODE
ERR.
USER