Insulation Sheet Example; Attaching Insulation Sheet To A Compactflash Card - Mitsubishi Electric Q12DCCPU-V User Manual

6
PREPARATORY PROCEDURES AND SETTING

(2) Insulation sheet example

Single-sided adhesive sheet for electric insulation
(3) Precautions
The insulation sheet must be as large as the CompactFlash card. Make sure that it is
not oversized and does not cover the groove (connector guide) on the side of the
CompactFlash card.
If any of these conditions occurs, the CompactFlash card cannot be inserted into the
C Controller module properly.
The sheet is oversized.
6.8.4 Measures against static electricity for commercially available CompactFlash cards in compliance with the EMC directives
• Base material: 50 m-PET film (UL compliant)
• Adhesive: Acrylic pressure sensitive adhesive
The exposed metallic part is not fully covered.
Figure 6.53 Attaching insulation sheet to a CompactFlash card (bad examples)
6.8 Inserting/Removing a CompactFlash Card and Access Stop
The groove on the side of the
CompactFlash card is covered.
6
1
2
3
4
5
6
7
8
- 69