Mitsubishi Electric Q12DCCPU-V User Manual page 366

Melsec q series, c controller module
Hide thumbs Also See for Q12DCCPU-V:
Table of Contents

Advertisement

11
MULTIPLE CPU SYSTEM CONFIGURATION
CPU number
Maximum number of
extension base units
Maximum number of I/O
modules
Main base unit model
No power supply module required
Extension base unit model
Q series power supply module required
Extension cable model
Q series power supply
module model
11
- 7
11.1 System Configuration
11.1.4 System configuration overview (when CPU No.1 is a C Controller module)
Table 11.1 Restrictions on the system configuration
CPU module 1: CPU No.1, CPU module 2: CPU No.2, CPU module 3: CPU No.3, CPU module 4: CPU No.4
QC05B, QC06B, QC12B, QC30B, QC50B, QC100B
Q61P-A1, Q61P-A2, Q61P, Q61P-D, Q62P, Q63P, Q64P, Q64PN
Precautions
• The total extension cable length must be 13.2m (43.31 feet) or less.
• Do not install the extension cables together with the main circuit lines (high
voltage and large current).
• Set a unique number for each extension base.
• If some Q5 B and Q6 B extension base units are used on the same system,
they can be connected in any order.
However, confirm the applicability of each unit referring to the QCPU User's
Manual (Hardware Design, Maintenance and Inspection).
• The QA1S6 B and Q6 RB extension base units cannot be used.
• Connect the extension cable from OUT of the extension cable connector of the
base unit to IN of the next extension base unit.
• Mounting 66 or more modules (including CPU modules) causes an intelligent
function module assignment error (error code: 2124, SP.UNIT LAY ERR.)
• "Number of CPUs" is the number of CPU modules set for "Number of CPUs" in
the <<Multiple CPU settings>> tab of C Controller setting utility.
• For details of the Motion CPU, refer to the manual for the Motion CPU.
• When the Q12DCCPU-V is CPU No.1, no Motion CPU can be installed.
When the Q06CCPU-V(-B) is CPU No.1, the Q172DCPU and Q173DCPU cannot
be installed.
• Programmable controller CPUs cannot be installed.
• When a C Controller module is used in a multiple CPU system, redundant power
base units cannot be used.
7 units
65 minus (Number of CPUs)
Q33B, Q35B, Q38B, Q312B
Q52B, Q55B
Q63B, Q65B, Q68B, Q612B

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sw3pvc-ccpu-eQ06ccpu-vQ06ccpu-v-b

Table of Contents