Dedicated Instructions; Devices Available For S(P).Gint And D(P).Gint Instructions - Mitsubishi Electric Q12DCCPU-V User Manual

13
COMMUNICATIONS BETWEEN CPU MODULES

(4) Dedicated instructions

Setting Internal device
data (System, user)
Bit Word
*1
(n1)
*2
(n2)
*3 *4
(D1)
*3 *4
(D2)
[Instruction symbol] [Execution condition]
SP.GINT
S.GINT
[Instruction symbol] [Execution condition]
DP.GINT
D.GINT
The following shows programmable controller CPU dedicated instructions used for
interrupt from a programmable controller CPU (another CPU).
Table 13.3 Devices available for S(P).GINT and D(P).GINT instructions
Link direct device
File register
R, ZR
Bit Word Bit
*4
*4
* 1 For the Basic model QCPU, High Performance model QCPU, and Universal model QCPU, index
modification is available.
* 2 For the Basic model QCPU and Universal model QCPU, index modification is available.
* 3 Only when both of (D1) and (D2) are omitted, they can be actually omitted.
* 4 Local devices cannot be used.
Command
Command
Figure 13.5 S(P).GINT instruction
Command
Command
Command
Command
Figure 13.6 D(P).GINT instruction
Available devices
Intelligent
function module
J \
U \G
Word
: Available,
DP.GINT (n1)
D.GINT (n1)
13.2 Interrupt from Another CPU
Index Constant
Others
register, Zn K, H
: Partially available,
SP.GINT (n1) (n2)
S.GINT (n1) (n2)
DP.GINT (n1) (n2)
(n2) (D1) (D2)
D.GINT (n1) (n2)
(n2) (D1) (D2)
13
9
10
11
: N/A
12
13
14
15
16
- 7